
Baby Gates – How and Where to Measure
BABY GATES | HOW AND WHERE TO MEASURE
What to consider BEFORE purchasing your Baby Safety Gates and Extensions
- Take accurate measurements and remember to factor in the skirting, if any:
If there is a skirting. Take two measurements:
– On the floor: Skirting to skirting or skirting to bannister pole
– Above the skirting, at a height of 76cm (the height of a standard baby gate): wall-to-wall or wall-to-bannister pole. Refer to the scenarios further down below - The maximum adjustable size of pressure-mounted baby gates includes the tension knobs on the sides, used to secure the gate.
Important to note:
Baby gate accessories and extensions are brand-specific. For example, you cannot use a Dreambaby Gate Extension on a Safety 1st or Bambino Baby Gate.
Pressure Mounted Safety Gate Sizes
DREAMBABY HAS TWO STANDARD-SIZE BABY GATES AVAILABLE:
The Dreambaby Xtra Wide Hallway Gate is a pressure-mounted gate (no drilling required):
- It has tension knobs that can be adjusted to fit openings from 99 to 106cm
- It can, however, extend up to 3,06m using optional gate extensions.
- Available Extension Sizes: 9cm | 18cm | 27cm | 36cm | 45cm | 54cm | 63cm | 1 meter
The Dreambaby Ava Standard Doorway Gate is a pressure-mounted gate (no drilling required)
Dreambaby Standard Gate Size with tension knobs
– Adjusts to fit openings from 75 to 84cm
Dreambaby Xtra-Wide Gate Size with tension knobs
– Adjusts to fit openings from 99 to 106cm
SUPER WIDE BARRIER GATES UP TO 3.75M
The Dreambaby Discovery 6 Panel Playpen comes with a wall mounting kit to convert it into an extra-long barrier gate that’s 3.75m long.
→ MUST BE HARDWARE-MOUNTED TO THE WALL.
DREAMBABY STANDARD GATE COMPARISON
Colour: WHITE
PRESSURE MOUNTED
(No Drilling Required)
Fits openings from 75cm to 84cm
Gate Height: 76cm
Can extend up to 2.84m using optional gate extensions.
Can be mounted to Bannister Poles using
Y-spindle Adaptors.
Colour: CHARCOAL
PRESSURE MOUNTED
(No Drilling Required)
Fits openings from 75cm to 84cm
Gate Height: 76cm
Can extend up to 1.38m using optional gate extensions.
Can be mounted to Bannister Poles using
Y-spindle Adaptors.
Colour: WHITE
PRESSURE MOUNTED
(No Drilling Required)
Fits openings from 99cm to 106cm
Gate Height: 76cm
Can extend up to 3.06m using optional gate extensions.
Can be mounted to Bannister Poles using
Y-spindle Adaptors.
Colour: WHITE Only
HARDWARE-MOUNTED
(must be drilled into the wall.)
Fits openings from 67cm to 112cm
Gate Height: 68cm
Can’t be extended
Maximum width: 112cm
Colour: WHITE
PLAYPEN: ASSEMBLED
BARRIER GATE: HARDWARE-MOUNTED
BARRIER GATE: 3.75m
PLAYPEN: 1.2m x 1.2m
Height: 74cm
Can be assembled as a Playpen OR a Wide Barrier Gate
Colour: BLACK
PLAYPEN: ASSEMBLED
BARRIER GATE: HARDWARE-MOUNTED
BARRIER GATE: 3.75m
PLAYPEN: 1.2m x 1.2m
Height: 74cm
Can be assembled as a Playpen OR a Wide Barrier Gate
Here are a few different scenarios (Gate Configurations):
SCENARIO 1
Your measurement falls within the adjustable size of the standard sized gates available (No extensions required.)
Choose a Dreambaby standard-sized gate that is closest to your measurement/s, remembering to factor in the skirting, if any:
- For standard doorways with a width ranging from 75 cm to 84 cm, use:
The Dreambaby Standard Baby Safety Gate - For wider areas that range from 99 cm to a maximum width of 106 cm, use:
The Dreambaby Ava Extra-Wide Hallway Gate
SCENARIO 2
The Adjustable Sizes of the Standard Gates are either too narrow or too wide
Q: What if your area does not fall within the Adjustable size, for example, if your area is anything between 85 and 98 cm?
A: There are different-sized baby gate extensions available specifically for this reason.
EXAMPLE: Area to cover 90cm (skirting to skirting) and 93cm (wall to wall)
ALWAYS CALCULATE BACKWARDS WITH EXTENSION SIZES IN MIND:
9cm | 18cm | 27cm | 36cm | 45cm | 54cm | 63cm | 1 meter
Take the measurements of 93cm (wall-to-wall) and 90cm (skirting-to-skirting) and SUBTRACT the smallest, most logical sized extension (9cm in this case).
- Calculation: 93cm – 9cm = 84cm | 90cm – 9cm = 81cm
- Both 84cm and 81 cm fall within the adjustable size of the Dreambaby Standard-sized gate (adjusts to fit openings between 75 – 84 cm).
In summary, you will need:
SCENARIO 3
There is a banister pole on the Stairway
Q: How do I pressure-mount my baby gate to a round bannister pole?
A: Baby Proof has baby gate banister pole adapters available to purchase separately
EXAMPLE: Area to cover 102cm (skirting to pole) and 104cm (wall to pole)
In summary, you will need:

















