Sliding Door Transfer Stickers

Sliding Door Transfer Stickers Product Features:

• 1 x sheet per pack | Size: 50 x 13cm
• 3 x diamond (sandblasted effect) patterns per sheet.

Installation Instructions:

You will need: 

• Methylated Spirits OR Benzene
• A dry clean cloth

1. Clean your window/sliding door before applying, ensuring the glass surface is dry.
2. Use a koki pen/or permanent marker to draw a straight guideline indicating where you would like the top of the diamond shapes to go.  (Tip: Place at a height equal to OR higher than 75cm and less than 1,2m)
3. Find the center of the glass and also mark this.  The center diamond must line up with the center of the glass.
4. Position the sheet/strip on the inside of the window/sliding door under your guideline with prestik, ensuring the diamond shapes are in a straight line and the centers are aligned. Stand back to double check if it it looks straight.
5. Rub the transfer stickers with a dry cloth, so that when you pull the slightly transparent side off, the shapes stick to this side (the slightly transparent side.)
6. Once you have lifted/peeled off this side completely you are ready to apply it to the glass surface.
7. Place the strip just under the guideline you drew earlier, placing the center down first, slowly rub the diamond shapes from the middle outward ensuring there are minimal bubbles.
8. Once you have all 3 diamond shapes stuck down, rub again,
9. Slowly peel off the transparent sheet, allowing the sandblasted diamond shapes to stay behind on the glass.
10. Use the Methylated Spirits OR Benzene and cloth to remove the guideline
11. Good Job! Now stand back and admire your work! Your child will now be protected from running into a closed sliding door.

CLICK HERE for more baby/toddler safety window and door products.